Operating Instructions; Controls Of The Ice Maker - Summit Classic Collection CLIM15 Instructions D'utilisation

Ice Maker Performance Mode Instructions (cont'd)
Performance Mode Instructions
Manual drainage Manually drain the
system mode water from the ice
bin
(If you're operating
using the "Manual
drainage system
mode", ice water
will restrict drain
water from flowing
out.)

CONTROLS OF THE ICE MAKER

The Ice Maker should be placed where the ambient temperature is between 10-32°C (50-90°F). If the
ambient temperature is above or below this range, the performance of the unit may be affected.
INSTALLATION INSTRUCTIONS
Suitable situation
There is no drain hole
in the room.
.

OPERATING INSTRUCTIONS

Operation instruction
Ref.: Fig. A, Fig. B & Fig. C
Screw Nut and Switch
screw nut (front) (3) + seal washer (front) (4)
screw nut (back) (7) + seal washer(back) (6)
screw nut for valve seal (11)
screw nut for valve seal (12)
force water outlet switch (8)
1. Please be sure the screw nut and switch are in
the above condition to avoid water leakage.
2. Periodically check the ice bin (1), and water
level indicator (5). If the water level exceeds the
indicator water level, please drain off the excess
water.
3. When draining off the water, you can remove
the ice bin (1), screw nut (front) (3) and seal
washer (front) (4). Remove the excess water,
then tighten the above screw and seal washer.
8
Condition
lock
lock
lock
lock
OFF