Cleaning The Inner Water Container - Summit Classic Collection CLIM15 Instructions D'utilisation

CLEANING THE INNER
WATER CONTAINER
Please disconnect unit from power. To avoid electric
shock, make sure no water is near the ice maker or
on floor board and follow the steps below.
1. Ice maker machine cover board
2. Ice maker machine cover plate
3. Water container
4. Drain tube
1. Take out the cover board (1) of the ice maker machine (Fig. A).
2. Use the brush to clean all the parts, then use clean water to flush them.
3. After cleaning, install parts in reverse order.
4. To drain water from the water container (3), dislodge drain tube.(4) (Fig. B).
CARE AND MAINTENANCE
NOTE:
If the unit is unplugged, has lost power, or is turned off,
you must wait 3 to 5 minutes before restarting the unit.
If you attempt to restart before this time delay, the Ice
Maker will not start.
12