Care And Maintenance; Cleaning Your Ice Maker; Power Failure; Moving Your Ice Maker - Summit Classic Collection CLIM15 Instructions D'utilisation

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

CLEANING YOUR ICE MAKER

Turn off the power, unplug the appliance, and remove
the ice bin.
Wash the inside surfaces with a warm water and
baking soda solution. The solution should be about 2
tablespoons of baking soda to a quart of water.
Wash the ice bin with a mild detergent solution.
Wring excess water out of the sponge or cloth when
cleaning area of the controls, or any electrical parts.
Wash the outside cabinet with warm water and mild
liquid detergent. Rinse well and wipe dry with a clean,
soft cloth.

POWER FAILURE

Most power failures are corrected within a few hours
and should not affect the temperature of your
appliance if you minimize the number of times the
door is opened. If the power is going to be off for a
longer period of time, you need to take the proper
steps to protect your contents.

CARE AND MAINTENANCE

MOVING YOUR ICE MAKER

Remove all items.
Securely tape down all loose items (such as the
bucket) inside your appliance.
Turn the adjustable leg up to the base to avoid
damage.
Tape the door shut.
Be sure the appliance stays secure in the upright
position during transportation. Also protect the outside
of the appliance with a blanket or similar item.
The Ice Maker should be located in the coolest area of
the room, away from heat producing appliances, and
out of direct sunlight.

VACATION TIME

Short vacations: Leave the Ice Maker operating
during vacations of less than three weeks.
Long vacations: If the appliance will not be used for
several months, remove all items and turn off the
appliance. Clean and dry the interior thoroughly. To
prevent odor and mold growth, leave the door open
slightly, blocking it open if necessary.
11

Publicité

Chapitres

Table des Matières
loading

Ce manuel est également adapté pour:

Bim45

Table des Matières