Electromagnetic Fields (Emf); Before First Use; Preparing For Use; Filling The Water Tank - Philips GC4800 Série Mode D'emploi

Masquer les pouces Voir aussi pour GC4800 Série:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 59
EnGlish
8
a short while: set the steam control to position
0, put the iron on its heel and remove the mains
plug from the wall socket.
- Always place and use the iron on a stable, level
and horizontal surface.
- Do not put perfume, vinegar, starch, descaling
agents, ironing aids or other chemicals in the
water tank.
- This appliance is intended for household use only.

Electromagnetic fields (EMF)

This Philips appliance complies with all standards
regarding electromagnetic fields (EMF). If handled
properly and according to the instructions in this
user manual, the appliance is safe to use based on
scientific evidence available today.

Before first use

1
Remove any sticker, protective foil or plastic
from the soleplate.
2
Rinse and dry the filling cup.

Preparing for use

Filling the water tank

type of water to be used
You can use normal tap water to fill the water tank.
Tip: If the tap water in your area is very hard, we
advise you to mix it with an equal amount of distilled
water. Do not use distilled water only.
1
Make sure the appliance is unplugged.

Publicité

Table des Matières
loading

Table des Matières