Soler&Palau POWERVENT PV-100PS Instructions De Montage page 2

ENGLISH
POWERVENT
The POWERVENT centrifugal range of in-line duct exhaust fans have
been manufactured to the rigorous standards of production as defined by
the International Quality Standards ISO 9001. All the components have
been checked and tested at the end of the manufacturing process.
We recommend that you check the following after receiving this product:
1.The correct size has been received
2.The correct model has been received
3.The details on the rating label correspond to the electrical supply:
voltage frequency etc.
Remove the unit from packaging and inspect for shipping damage within
15 days of receipt. If the product is found to be damaged, immediately
contact your local authorized supplier. DO NOT OPERATE THE UNIT IF
DAMAGED.
These instructions should be considered as a supplement to all applicable
EPA standard practices, state and local building code regulations.
ENVIRONMENT
The POWERVENT series of fans are suitable for operation in indoor
environments only. All models are suitable for the exhaust and supply of
non-hazardous airstreams.
INSTALLATION
WARNING: TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR
INJURY, OBSERVE THE FOLLOWING:
(a)Use this unit only in the manner intended by the manufacturer. If you
have any questions contact the manufacturer.
(b)Before servicing or cleaning the unit, switch the power off at the service
panel and lock the service disconnecting means to prevent power
from being switched on accidentally. When the service disconnecting
means cannot be locked; securely fasten a prominent warning device
such as a tag to the service panel.
2