Connecting To Audio Equipment; Pinout; Connecting The Microphone - Harman AKG Drum Set Session I Mode D'emploi

3 Connecting to Audio Equipment

Pinout

Connecting the
Microphone
Drum Set Session I
The microphone provides a balanced output on a 3-pin male XLR connector:
Pin 1: ground
Pin 2: hot
Pin 3: cold
Figure 2: Connecting to a balanced input with phantom power
1) Use an XLR cable to connect the microphone to a balanced XLR input with
phantom power.
2) Switch the phantom power on. (Refer to the user manual of the unit to
which you connected your microphone.
Connecting to Audio Equipment
13