RCA RCD175 C Guide De L'utilisateur page 6

4. Push the disc tray back in.
The total number of tracks on the disc can be read
from display.
Play and pause
1. In stop mode, press
2. During CD playback, press
Press again to resume.
Skip and search
1. Press
respectively.
2. Press and hold
track backward or forward respectively.
Stop playback
Press to stop playback.
Play mode
Press BAND / MODE to select among playback mode
(repeat current track / repeat all / random). Selection
made is indicated by icons on display.
Programming
1. In stop mode, press PROG / MEM to enter program
setting mode.
The program location shows, meanwhile the track
number "
display.
2. Press
program.
3. Press PROG / MEM again to confirm your selection
and access the next program location.
4. Repeat steps 2 to 3 to program to a maximum of 20
tracks.
5. P r e s s
playback (MEMORY indicator lights on the display).
• Press to return to stop mode.
Displaying program list
In stop mode, press PROG / MEM repeatedly to show
program list.
Exit program playback mode
In program playback mode, program mode will
be deactivated and memory icon will turn off after
playback of all programmed tracks.
Clearing program list
Your program list will be erased once you press
stop program playback and press
will also be erased if you open the disc compartment
door, change to another source mode (e.g. radio) or
power off the unit.
811-317591W012 EN & FR & ES IB OK Kelly.indd 5 811-317591W012 EN & FR & ES IB OK Kelly.indd 5
to begin CD playback.
to pause playback.
/ to skip to the previous or next track
/ to search quickly current
" and MEMORY icon flash on the
/ to select the track you want to
i n p r o gra m m o d e t o s t a r t p r o gra m
again. Program list
Tape Player
Playing a tape
1. When the unit is on, press SOURCE until TAPE
mode is selected. The tape indicator "
on the display.
2. Press STOP / EJECT
door.
3. Insert a tape into the
d o o r a n d p u s h t h e
door closed.
4. Press REW or FWD
to the desired starting position. Press STOP
EJECT to stop winding.
5. Press PLAY to start playback.
• Press PAUSE to pause playback (press again to
release the button to resume playback).
• Press STOP / EJECT
NOTE:
• Be sure to slide the cassette into the tape slot on
the door. Do not place the tape directly onto the
tape mechanism.
• For better recording quality, use normal bias tape
(Type I) only.
Recording to tape
From radio
1. Insert a tape into the deck.
2. Press SOURCE until RADIO mode is selected.
3. Press BAND / MODE to access the desired radio
band.
4. Press / to tune to the station to be recorded.
5. Press REC and PLAY
recording.
6. Press PAUSE or STOP
recording respectively.
From CD
1. Insert a tape into the deck.
2. Press SOURCE until CD mode is selected.
3. Insert the disc to be recorded.
4. Select the track or program to be recorded.
5. Press REC and PLAY
recording.
6. Play the track or program to be recorded.
7. Press PAUSE or STOP
to
recording respectively.
From auxiliary input
1. Insert a tape into the deck.
2. Press SOURCE until the indicator "
the display.
3. Start playback from the auxiliary device.
4. Press REC and PLAY
recording.
5. Press PAUSE or STOP
recording respectively.
EN - 5
" lights
to open the tape deck
to wind the tape
/
to stop playback.
together to begin
to pause or stop the
together to begin
to pause or stop the
" lights on
together to begin
to pause or stop the
9/16/2010 4:58:18 PM 9/16/2010 4:58:18 PM