RCA RCD175 C Guide De L'utilisateur page 5

Display
In CD mode
- Track number (shows during disc playback)
- Total track number in CD stop mode
- Program location
- Elapsed playback time
Radio
Select radio mode
Press ON / STANDBY
Press SOURCE until RADIO mode is selected.
Select radio band
Press BAND / MODE to select between FM and AM
band.
NOTE: Rotate the unit for better reception.
Tuning to a station
• Press
• Press
NOTE: Press and hold
to the next station.
Setting preset stations manually
1. In radio mode, press BAND / MODE to select
radio band.
2. Press
preset station.
3. P r e s s a n d h o l d P R O G / M E M . M e m o r y i c o n
fl ashes.
4. Press
5. Press PROG / MEM to confirm. Memory icon
stops fl ashing.
6. Repeat steps 2 to 5 to set additional preset
stations.
NOTE: There are 10 preset locations for FM band
and 10 preset locations for AM band on this unit.
Using presets
1. Press BAND / MODE to select between bands.
2. Press PROG / MEM repeatedly to access the
desired preset stations.
811-317591W012 EN & FR & ES IB OK Kelly.indd 4 811-317591W012 EN & FR & ES IB OK Kelly.indd 4
Radio band Random playback
Shows source, EQ, volume levels, program
to turn on the unit.
to tune down radio frequency.
to tune up radio frequency.
to automatically tune
/
/ to select the station to save as a
/ button to select the preset number.
Program playback mode activated
Repeat mode
REPEAT
REPEAT
Dynamic bass boost system
Tuner frequency unit
In Tuner mode
- Preset location, radio frequency
In Tape mode
- Displays " " in tape mode.
In AUX mode
- Displays " " in AUX mode.
CD Playback
This unit is compatible with audio CD-RW /
CD-R / RW
CD-R discs.
Notes on CD-R / RW Disc:
• Do not affix any type of labels to either side
(recordable or labeled side) of a CD-R/RW disc as
this may result in the unit malfunctioning.
• To avoid damages to the CD-R / RW disc, do not
open the disc compartment door while the disc is
being read.
• Do not load an unrecorded CD-R / RW disc into
the unit. This may take a longer time to read the
disc.
• Playback capability for CD-RW discs may vary due
to variations in the quality of the CD-RW disc and
the recorder used to create the disc.
Selecting CD mode
When the unit is on, press SOURCE until CD mode is
selected.
Loading disc
1. Press the PUSH OPEN
button.
2. Gently slide disc tray out
with your fingers.
3. Place a disc on the disc tray with the label side
facing up.
EN - 4
lights - repeat current track
flashes - repeat whole disc
9/16/2010 4:58:18 PM 9/16/2010 4:58:18 PM