Weidmüller wavePak DC/DC Mode D'emploi page 10

Power Supply Requirements
Power Supply Ratings are as follows:
Voltage Range
12 - 60 V DC
Field power supply
The wavePak DC/DC can power a loop powered transmitter input
using the inbuilt 24 V DC field power supply. A jumper setting brings
the power to the input terminals.
Environmental conditions
Relative humidity: 0-90 % (non-condensing)
Ambient temperature: 0-60 °C
10
QS61001096_wavePak_DCDC_Buch.ind10 10
Nominal Voltage
24 V DC
Power
3 W (at 24 V DC)
09.02.2009 15:36:39