R.G.V. DUETTO PLUS Mode D'emploi Et D'entretien page 46

- Remove the perforated grille (C2) from the body
(C) by pressing on it and pulling it outwards at
the same time.
- In order to properly reposition the perforated
grill (C2) on the sieve body (C), push it down
to make sure that that open part of the grille is
positioned on the upper part of the body.
C
- To remove the disk easily, insert a flat
screwdriver between it and the infeed duct (B)
for leverage.
- Make sure that the set screw (K) on the conical
sieve (C) is screwed in a way that will prevent
losing it.
Handle the star blade with particular
attention. It is very sharp. It can cause
injury!
46
C2
C2
C
K
C
C
C2