Cabinet Dimensions - KitchenAid POWER KBPU182VSS Instructions D'installation Et Guide D'utilisation Et D'entretien

Counter or support surfaces must be level.
The installation of this Power™ burner must conform with local
codes or, in the absence of local codes, with either the National
Fuel Gas Code, ANSI Z223.1/NPFA 54, Natural Gas and Propane
Installation Code, CSA B149.1, or Propane Storage and Handling
Code, B149.2.
The following dimension chart and illustration include cutout dimensions and minimum spacing requirements for all built-in outdoor
products. The illustration is for reference. The design of your cabinet layout can be personalized, but the dimensions for the cutouts and
minimum spacing must be followed.
*NOTE: Maintain a minimum ³⁄₄" (1.9 cm) countertop overhang from the door/drawer mounting surface to help keep water runoff from
the countertop out of the door or drawer.
K
B
**Each corner of countertop cutouts for built-in grill, side burner, sear burner, Power™ burner and refreshment center.
6

Cabinet Dimensions

C
C
E
K
J
K
M
Copies of the standards listed may be obtained from:
CSA International
8501 East Pleasant Valley Rd.
Cleveland, Ohio 44131-5575
NOTE: The outdoor Power™ burner drops into the enclosure
opening and is supported by its side flanges. No bottom support
is needed.
D
L
K
F
E
D
K
G
A
H