Indoor Wet Vacuum Cleaning With Foam Filter; Draining The Container Of Liquids - BASETech 2302702 Notice D'emploi

g) Indoor wet vacuum cleaning with foam filter
The foam filter is used to protect the motor unit during wet vacuuming.
When wet vacuum cleaning, do not install the paper bag.
• Remove the motor unit from the container.
• Turn the motor unit upside down, then slide the foam filter fully onto the motor head.
• Place the motor unit back onto the container and lock in place before operating.
• Screw the water outlet cap securely to the base of the container over the water outlet.
h) Draining the container of liquids
• In order to drain the tank, place the product over a drain and remove the water outlet cap.
• Before the next operation, make sure that the water outlet cap is installed properly.
29