Additional Information; Understanding Error Messages - Pioneer MJ-L11 Mode D'emploi

Additional information

8

Understanding error messages

Message
NO DISC
DISC ER*
?DISC
DISC FULL
BLANK DISC
Playback MD
PROTECTED
TOC FULL
Can't REC
TEMP OVER
Can't EDIT
NAME FULL
DEFECT
MECH E*
60
En
Description
MD is not loaded.
The MD data can't be read.
The disc is damaged.
The MD doesn't contain the TOC or the data is corrupted.
The MD is corrupted or the MD is out of standard.
The MD has no space available for recording.
The MD doesn't contain any recorded information.
An attempt is made to record or edit a playback-only MD.
The MD is protected against accidental erasure.
The disc does not have the space for recording the track number
and character data.
Recording cannot be completed successfully due to shock or disc
damage.
The temperature is too high.
Editing is not possible.
There is no space left for registering a disc/track/group name.
Recording interrupted due to disc damage.
The MD recorder is not functioning properly.
Action
• Load an MD.
• Reload the MD.
• Reload the MD.
• Use another MD.
• Use another MD.
• Erase some tracks or use
another recordable MD.
• The disc is ready to be
recorded on.
• Use a recordable MD.
• Close the accidental
erase-protect tab.
• Erase the disc or use another
recordable MD.
• Restart recording or use
another recordable MD.
• Turn power off and leave to
cool.
• Retry at another position on
the disc.
• Shorten the disc/track/group
name.
• Use another recordable MD.
• Turn power off then on again.