Troubleshooting - Selve i-R Timer Plus Notice D'utilisation

Troubleshooting

Troubleshooting
Problem
Drive is not functioning
Drive is not functioning,
transmission control
light is not lit
Drive is not functioning,
transmission control
light is lit
Astro programme
does not function according
to the switching times
The i-R Timer Plus does not
carry out the switching
commands
The i-R Timer Plus does not
carry out the switching
commands precisely
The sun and twilight
parameters cannot
be changed,
and/or are not displayed
Venetian blind or
roller shutter does not
move to the end limit
Transmission control light
is flashing
The transmitter does not
react after the batteries
have been changed
Fichier téléchargé sur http://www.servistores.com
Cause
Faulty connection
Batteries are dead
Batteries are
incorrectly inserted
Receiver outside the
radio range
Transmitter is not
programmed in the
receiver
Date is incorrect
Wrong city or wrong
latitude/longitude set
Holiday function
is switched on
Astro shift is set
The sliding switch is
on manual
Holiday function
is switched on
No light sensor is connected Check the light sensor,
or the light sensor,
and/or the connecting cable
is faulty
No end limit position is set
Batteries are running out
Power supply has been
interrupted for too long
83
Solution
Check the connection
Insert new batteries
Insert batteries correctly
Reduce distance to
the receiver
Programme transmitter
Set correct date
Set correct city
or exact degrees
latitude/longitude
Switch holiday function off
Adjust astro shift
Move the sliding switch
to automatic
Switch holiday function off
connecting cable and
connector plug
Set the end limit position
using the setting menu
PROG 1/2
Insert new batteries
Press the RESET button,
check settings
GB