Rear Panel - Roland PK-9 Mode D'emploi

Rear panel

A
EXTERNAL PEDAL socket
Allows you to connect an optional pedal switch
(Roland DP-series), an optional footswitch (BOSS
FS-5U) or another (optional) expression pedal
(Roland EV-5). See page 16 for how to assign the
desired function to the pedal or footswitch.
B
PK OUT connector
Use the PK cable supplied with the PK-9 to connect
this socket to an external instrument's PK IN socket
(page 11).
C
MIDI connectors
They allow you to connect the PK-9 to external MIDI
devices (page 12).
MIDI Pedalboard PK-9
A
D E
C
B
D
DC IN jack
Allows you to connect the supplied AC adaptor
(page 11).
E
POWER switch
This turns the power on/off (page 12).
With the factory settings, the PK-9's power will
automatically be switched off 240 minutes (4
hours) after you stop playing or operating the
PK-9.
If the PK-9's power has been turned off automati-
cally, you can use the [POWER] switch to turn it back
on again.
If you don't want the power to turn off automati-
cally, change the "Auto Off" setting to "OFF"
(page 16).
r
Rear panel
9