Beha-Amprobe VOLTfix Série Mode D'emploi page 4

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 32
Limited Warranty and Limitation of Liability
Your Beha-Amprobe product will be free from defects in
material and workmanship for one year from the date of
purchase unless local laws require otherwise. This warranty
does not cover fuses, disposable batteries or damage from
accident, neglect, misuse, alteration, contamination, or
abnormal conditions of operation or handling. Resellers are
not authorized to extend any other warranty on the behalf of
Beha-Amprobe. To obtain service during the warranty period,
return the product with proof of purchase to an authorized
Beha-Amprobe Service Center or to an Beha-Amprobe
dealer or distributor. See Repair Section for details. THIS
WARRANTY IS YOUR ONLY REMEDY. ALL OTHER WARRANTIES
- WHETHER EXPRESS, IMPLIED OR STATUTORY - INCLUDING
IMPLIED WARRANTIES OF FITNESS FOR A PARTICULAR
PURPOSE OR MERCHANTABILITY, ARE HEREBY DISCLAIMED.
MANUFACTURER SHALL NOT BE LIABLE FOR ANY SPECIAL,
INDIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES OR
LOSSES, ARISING FROM ANY CAUSE OR THEORY. Since some
states or countries do not allow the exclusion or limitation of
an implied warranty or of incidental or consequential damages,
this limitation of liability may not apply to you.
Repair
All Beha-Amprobe returned for warranty or non-warranty
repair or for calibration should be accompanied by the
following: your name, company's name, address, telephone
number, and proof of purchase. Additionally, please include
a brief description of the problem or the service requested
and include the test leads with the meter. Non-warranty
repair or replacement charges should be remitted in the
form of a check, a money order, credit card with expiration
date, or a purchase order made payable to Beha-Amprobe.
In-warranty Repairs and Replacement – All Countries
Please read the warranty statement and check your battery
before requesting repair. During the warranty period, any
defective test tool can be returned to your Beha-Amprobe
distributor for an exchange for the same or like product.
Please check the "Where to Buy" section on
beha-amprobe.com for a list of distributors near you.
Additionally, in the United States and Canada, in-warranty
repair and replacement units can also be sent to an
Amprobe Service Center (see address below).
Non-warranty Repairs and Replacement – United States and
Canada
Non-warranty repairs in the United States and Canada
should be sent to an Amprobe Service Center. Call Amprobe
or inquire at your point of purchase for current repair and
replacement rates.
USA:
Amprobe
Everett, WA 98203
Tel: 877-AMPROBE (267-7623)
Canada:
Amprobe
Mississauga, ON L4Z 1X9
Tel: 905-890-7600

Publicité

Table des Matières
loading

Table des Matières