Beha-Amprobe VOLTfix Série Mode D'emploi page 12

Note: High sensitivity range is optimized for 12 to
50 V range with a maximum indication up to 1000
V. Using the tester above 50 V in high sensitivity
range may affect polarity indication.
When operating the Voltage Probe, always
keep fingers behind the finger guard.
Checking for the Magnetic Field
(NCV-1040-EUR MAGNO-VOLTfix)
The NCV-1040-EUR MAGNO-VOLTfix can test for a
magnetic field in addition to AC voltage detection.
A solid yellow LED will illuminate when a magnetic
field is detected.
Note: If AC voltage and a magnetic field are
detected simultaneously, the Voltage Probe will
flash both red and yellow.
Testing receptacle:
LINE Contact
Testing wire and cable breaks:
LINE
Cable break
5