TrekStor blaxx Mode D'emploi page 15

Mode: FM radio
Switch to the "fm " mode.
rAdio
Note: Always connect your earphone or headphone to the headphone jack of the blaxx since the earphone / head-
phone cable serves as an antenna for the internal radio.
To invoke the FM radio menu, hold the
to select the desired menu item, and confirm by pressing the
ing the button.
B
• Switching between manual station selection and memory mode
Briefly press the
D
"s ".
tAtion
• Automatic memory assignment / automatic station scan
To start the automatic station scan, select "A
inquiry. The blaxx now automatically searches for the radio stations with the strongest reception and
saves them in 20 memory locations.
• Switching between saved stations
In memory mode "s
tAtion
or button.
P
• Manual frequency change / manual search
In manual station mode "s
by 0.05 MHz. Hold down the
frequencies for stations with strong reception.
• Saving individual stations
Change to manual station selection "s
the FM radio menu. Press the
pressing the button.
D
• Setting the FM radio region
In the radio menu, select "fm
• Recording FM radio
Select "fm " in the FM radio menu in order to start an FM radio recording. To pause the current
record
recording, briefly press the
again. Briefly press the
Note: All radio recordings are saved in the "fm" folder of the blaxx.
Mode: Record
Switch to "r " mode.
ecord
In this mode, you can execute voice recordings and line-in recordings.
You can execute voice recordings using the integrated microphone.
You can connect an external device to the line-in jack (such as a CD player) and directly record from it.
Connect the included line-in cable to the USB/line-in jack of the blaxx.
Note: By default, the blaxx performs a voice recording. If the line-in cable is connected, you can only perform
line-in recordings.
A voice/line-in recording is started automatically during the opening of "r
rent recording, briefly press the
again. Briefly press the
B
Note: All voice recordings are saved in the "Voice" folder and all line-in recordings in the "line-in" folder of the blaxx.
button for approximately 1 second. Press the
B
button to switch between manual station selection "s
uto scAn
", you can switch between the existing memories by briefly pressing the
", briefly press the
cAn
or button for the blaxx to automatically scan the upper and lower
O P
". Choose the desired frequency and select "s
cAn
or button to select the desired memory and confirm by briefly
R Q
" to create regional radio settings.
region
button. To restart the current recording, briefly press the
D
button to stop recording.
B
button. To resume the current recording, briefly press the
D
button to stop recording and exit the mode.
button. Exit the FM radio menu by press-
D
" in the FM radio menu and confirm the subsequent
or button to change the reception frequency
O P
ecord
– 15 –
or button
R Q
" and the memory mode
cAn
O
" from
AVe stAtion
button
D
" mode. To pause the cur-
button
D
EN