Publicité
Les langues disponibles
Les langues disponibles
EN-2
DO electrode operation:
1.
Unpacking
Carefully remove the protective bottle from
the tip of the electrode by unscrewing the lid
then removing the bottle. Remove the
shorting plug from the connector and store in
a safe place. Be careful because the
protective bottle lid is tightly fit on the
electrode.
2.
Calibration
Connect the electrode to the instrument, rinse
with deionized water and carefully dry the tip
of the electrode with a tissue. Then follow
your instrument instruction manual for
detailed calibration.
After calibration and measurement, you
should rinse the DO electrode then storage in
the protective bottle.
STDO11
Publicité
