Table Des Matières; Installation Precautions - Pioneer PRA-BD11 Mode D'emploi

Thank you for buying this Pioneer product.
Please read through these operating instructions so you will know how to operate your
model properly.
This product is an optional board designed for model PRV-LX1 or PRV-LX10
DVD recorder.
This product cannot be used alone, nor installed and used on any products other than the
PRV-LX1 or PRV-LX10 DVD recorders.
* PRV-LX10 is the European-market version of the PRV-LX1.

Installation Precautions

7 Installation of this device requires a high level of technological expertise; to
assure proper operation and personal safety, installation is to be performed
by a Pioneer Service representative. For details, consult your dealer.
Precautions Regarding Use
7 Pioneer may not be held liable for the loss of any data or any other direct or
indirect damage suffered as the result of the use or breakdown of this product.
It is strongly recommended that regular backups be taken of all critical data.
7 Care must be taken not to infringe copyright restrictions under the laws of
each country.
If this device is used to record copyrighted materials, approval must be
obtained from the respective copyright holders. The recording of copyrighted
materials without the express approval of the respective copyright holders
may result in legal penalties. Pioneer disclaims any and all responsibility for
any legal damages resulting from the use of this device in the unauthorized
copying of copyrighted materials.
7 All names of corporations, products, and systems listed herein, even when
the (™) or (®) symbols are omitted, should be considered the registered
trademarks of their respective owners.
Table of Contents
Precautions Regarding Use ........................................ 5
Confirm Supplied Accessories ................................... 5
System Overview ....................................................... 6
Connector Description ............................................... 7
Installation .................................................................. 8
Using PRA-BD11 ...................................................... 20
Using PRA-BD12 ...................................................... 22
Troubleshooting ........................................................ 23
Specifications ........................................................... 25
4
PRA-BD11 / PRA-BD12
En