Reference CECWC2Z77C: https://eprel.ec.europa.eu/qr/389834
Door reserving
1. Parts for door reversing
①Door hinge cover
⑥Handle screw ⑦Handle
2. Handle installation
Our wine cooler is delivered with the handle in a separate
package.
To install the handle:
① Take out the handle; point it precisely to the two holes
on the left side of the door.
② Push aside the door seal to reveal two holes; insert the
screws and screw the handle up.
4. Reversing the door
Our wine coolers are deliveredwith the door opening from left toright. To reverse the
openingdirection:
1) Close the door.
2) Take off the door hinge cover
① on the up right corner; Unscrew the flange
screws②; Take off door hinge③; Remove the up left
side cap④.
3) Lift the door up until the door gets off the lower door
hinge⑤.
4) Unscrew the lower door hinge.
②Flange screw
③Door hinge
④Cap
28
⑤Lower door hinge