Disposal; Specifications - Michael MBT1USB Mode D'emploi

Disposal

The MBT1USB must not be disposed together with the domestic waste. All users are
obliged to hand in all electrical or electronic devices, regardless of whether or not
they contain toxic substances, to ensure a disposal in environmentally acceptable
manner.
Therefore, return the device at the end of its lifetime to the manufacturer (address on
page 2).

Specifications

Name:
Application:
Application range:
Protection rating:
Receiver frequency:
Receiving range:
Power supply:
Operating conditions:
Storage conditions:
Dimensions:
Weight:
Interface:
Approved directives / norms:
MBT1USB
Radio receiver with USB interface
Mobile or stationary reading of M-Bus Mode T1
resource meters
IP54
868 MHz or 434 MHz, depending on version
depending on environment up to 300 m (outdoor)
or up to 20 m (indoor)
USB interface
-10 °C to +60 °C
10% to 85% humidity
-20 °C to +60 °C
145 x 65 x 35 mm (without cable)
approximately 100 g
USB 1.1 (cable length 0.75 m)
ETSI EN 301 489-1 V1.8.1 (2008-04) class 2
ETSI EN 301 489-3 V1.4.1 (2002-08) class 2
Non-specific Short Range Device (SRD)
Base station equipment
ETSI EN 300 220-1 V2.1.1 (2006-04)
ETSI EN 300 220-2 V2.1.2 (2007-06)
Receiver class 3
MBT1USB
(non-condensing)
7