Manual Mbt1Usb (English); Introduction; Important Considerations - Michael MBT1USB Mode D'emploi

Manual MBT1USB (English)

Introduction

The MBT1USB is a radio receiver for M-Bus Mode T1 resource meters with USB
interface. It is used for mobile reading and meter testing purposes.
The MBT1USB is connected to the USB interface of a Windows PC. The enclosed
software is described in a separate document MBT1USB_Manual.pdf which can
also be found on the CD.

Important Considerations

• The specific purpose of the MBT1USB is the mobile or stationary reading of
M-Bus Mode T1 resource meters.
• The MBT1USB is not a toy and it must be kept away from children.
• If a fault occurs, do not try to repair the unit yourself. Attempts to do so will
void the warranty. Refer all servicing to your supplier.
• Opening the enclosure of the MBT1USB will void the warranty.
• Do not connect the MBT1USB immediately to a PC. Before, you have to install
the reading software MBT1USB_Setup.exe from the enclosed CD, which also
contains the USB driver for your MBT1USB. Additional information about the
reading software and the installation of the USB driver is available in the
document MBT1USB_Manual.pdf, also on the enclosed CD.
4 MBT1USB