Using the spiral attachment
You can use the spiral attachment [D] with the
curling iron [A]:
• Check whether the curling iron [A] has cooled
down.
• Push the spiral attachment [D] with the grooves
on the attachment upwards to the centre onto
the closed, cold curling tongs [A].
• Press the lever of the curling iron to open the
curling tong.
• Carefully push on the spiral attachment [D] onto
the cold curling iron [A] as far as it will go.
• Close the curling tong.
• Divide your hair into individual strands. Hold the
strands taut.
• Press the lever of the curling iron [A] to open the
curling tong.
• Place the hair strand ends between the barrel
and the curling tong of the curling iron [A].
• Close the curling tong to hold the hair strands in
place.
• Wind the strands toward your head around the
spiral attachment [D]. Always ensure that the hair
strands are wound up as shown in the figure.
• Wait for about 10 seconds before you unwind the
hair strands again.
• Open the curling tong and pull the hair strands
out of the curling tong.
Using the straightening iron
• Attach the straightening/crimping attachment [12]
to the multi-function styler.
Straighten
• Slide the selector switch [11] into the „Straighten"
position [a]. Now the straightening iron [G] can be
used.
25
Closed
Crimp