INSTALLATION
Remove the packaging completely; clean the cabinet using warm water with a 5% concentration of
neutral soap. Be sure to use a soft cloth for drying.
Note that only specific product can be used for the glass, e.g. some types may leave behind limestone
residues.
WARNING! Use protective gloves during unpacking
and installation operations.
Cabinet must be installed on a perfectly even surface,
far away from any heat source (radiators, stoves, etc)
including sun rays.
Good running of the cabinet can be compromised in
cases where the airflow is disturbed (wind, ventilators,
air conditioning outlets, etc).
Smooth running of the cabinet is assisted when suf-
ficient air is permitted to flow through the bottom of
the unit; it is very important that the grills at the base
are kept uncovered.
Do not expose the cabinet to rain.
Install and position the unit in such a way so as to
allow easy access to the power socket.
Never use electrical equipment in the refrigerated
compartment.
Never place containers of liquid on or immediately
above the ticket counter; should the content spill
out, it would damage the counter.
THE REFRIGERATOR IS NOT SUITABLE FOR
WORKING IN DANGEROUS ENVIRONMENT
WITH RISK OF FIRE, EXPLOSIONS OR
RADIATIONS.
Operation is regular with ambient temperature
indicated on technical data plate.
CORRECT USE
Warning!
Do not put bottles or other glass containers in the freezer compartment as they might crack or break
when the contents are frozen.
It's absolutely forbidden to place the product in the tanks over the max load level.
It is fundamental not to exceed the load limits indicated to avoid altering correct air circulation and
thereby avoid a higher product temperature.
-21-