Proper Use - Beurer HK 45 Cosy 110V Mode D'emploi

– never use with animals,
– never use when damp.
• When in use, the electronic components in the switch of the heating pad make the switch
slightly warm. The switch should therefore never be covered or placed on the heating pad
when it is being operated.
• Do not pull, twist or make any sharp kinks in the cables.
• Do not stick pins or pointed objects into this heating pad.
• This appliance may not be used by children unless the switch has been preset by a parent or a
supervisory person, or the child has been sufficiently instructed in how to use this heating pad
safely.
• Children should be supervised to ensure that they do not use the heating pad as a toy.
• Please check this heating pad frequently for signs of wear and tear or damage. If there are signs
indicating the above or if this heating pad was used improperly, it must be returned to the manu-
facturer or retailer before further use.
• If the mains connection cable of this heating pad is damaged, it must be replaced by the manu-
facturer, its customer service department or a similarly qualified person to avoid any risk.
• Repairs may only be carried out by specially trained personnel or at an authorised repair workshop,
as special tools are required. Incorrect repairs may cause considerable danger to the user.
• Should you still have questions on using our appliances, please contact our customer service.

2. Proper Use

This heating pad is designed for warming the human body. It allows you to apply tar geted
warmth. Heat promotes the circulation and relaxes the muscles. This heating pad is not intended
for use in hospitals or for commercial applications. In particular, it may not be used on infants,
small children, persons insensitive to heat, helpless persons or animals.
Our heating pads made of breathable microfleece are very adaptable and agreeable to the skin.
They can also be used without their fabric cover. The detachable switch allows the pad to be
cleaned in the washing machine (see cleaning instructions).
When used for the first time, the heating pad may start to smell of plastic but this will soon go
away.
3. Operation
3.1 Safety
This heating pad has a SAFETY SYSTEM. This electronic sensor technology prevents the entire
surface of the heating pad from overheating by automatically switching off in the event of a fault.
If the safety system switches off the heating pad automatically as a result of a fault, the indicator
lamp is no longer illuminated even when the heating pad is switched on. Please note that, after
a fault has occurred, the heating pad can no longer be used for safety reasons and must be sent
to the service address indicated.
3.2 Putting into operation
First check that the switch is connected to the heating pad at the plug-in connection. Plug the
power cord into the mains outlet.
3.3 Selecting temperature
The fastest way to heat up the heating pad is to first set the switch to the highest setting. A lower
setting can be selected later if required.
We recommend the lowest temperature setting for extended use of the heating pad.
8