Technical Specifications - Ayce BHA001B Mode D'emploi

Switch off the power supply and disconnect from mains supply
●
when not in use, before cleaning or other maintenance.
To disconnect the appliance, switch it "OFF", and then remove
●
the plug from outlet. Do not pull the cord to disconnect the plug.
Do not operate in areas where gasoline, paint or other flam-
●
mable liquids are used or stored.
Indoor use only.
●
Do not insert or allow foreign objects to enter any ventilation or
●
exhaust opening, as this may cause an electric shock, fire or
damage to the appliance.
Always ensure that hands are dry before operating or adjusting
●
any switch on the product or touching the plug and
socket-outlet.
Do not leave this appliance unattended when it's in use.
●
The most common cause of overheating is deposits of dust or
●
fluff in the appliance. Ensure these deposits are removed regu-
larly by disconnect the appliance and vacuum cleaning air vents
and grilles.
Do not store away until the shoe dryer cools down, store the
●
shoe dryer in cool dry location when not in use.
Do not use this shoe dryer in the immediate surroundings of a
●
bath, a shower or a swimming pool and avoid direct sunlight.
Do not immerse in liquid or allow liquid to run into the interior of
●
the appliance, as this could create an electrical shock hazard.
CAUTION: In order to avoid a hazard due to inadvertent resetting
●
of the thermal cut-out, this appliance must not be supplied
through an external switching device, such as a timer, or con-
nected to a circuit that is regularly switched on and off by the
utility.
WARNING: In order to avoid a hazard for very young children,
●
this appliance should be installed so that the lowest height is
1m above the floor. (figure 1)

TECHNICAL SPECIFICATIONS

Model
Rated Voltage
Rated Frequency
Rated Power
Protective Class
PRPDUCTION DESCRIPTION
1 Grid
2 Timer / switch
3 Lamp
4 Extensional Tube
BHA001B
220-240V~
50Hz
350W
II
5 Wall Mounting Bracket
6 Hand on Board
7 Expanded Tube
8 Screw
40 | 41
GB