Steba LR5 Mode D'emploi page 12

Appliance:
1. Negativ Ionen sign
3. Timer Sogn
5. Anion Switch
1.Adjustable Speed
If you switch on the air cleaner with the On/Off, the appliance starts with the lowest power
and the sign Speed is at the top of the display. When more air is needed, press the speed
switch one or two times, then the air output is put to medium or maximum . This is shown
in the display
2. 12h Timer Adjustment
The basic unit is 1h. By pressing the timer switch one time, the time is incremented by 1h.
After the time was adjusted, the time is going dwon by minutes and stops the device after
the last minute. The time is shown in the display.
3. Negative Ionen knob
If anions are needed, press the negative ion switch. The appliance is producing negative
ions and it is shown in the display.
4.remote control
The appliance is equipped with a remote control. The distance between the remote control
and the appliance should be not too big and no obstacles should be in between and the
angle should be not too big.
5.Memory Function:
The last adjustments will be safed when the appliance is switched off. When you turn the
appliance on again, the same adjustments will be on the display.
12
2. Speed
4. On/Off switch
6. Speed switch 7. Timerswitch