Adding Adapter C To Existing Network Ab (Network Abc) - Engel PL 2000 Manuel D'utilisation

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

The procedure is as follows:
1. Press and hold the security button on Adapter A for 10 seconds and release it when device LED auto
reboots. The password to Adapter A becomes "Random_A"
2. Press and hold the security button on Adapter B for 10 seconds and release it when device LED auto
reboots. The password to Adapter B becomes "Random_B"
3. Currently, Adapter A and Adapter B are not networked
4. Press and hold the security button on Adapter A for 2 seconds then release.
5. The Power LED on Adapter A starts to fl ash.
6. Within 120 seconds after the Power LED on Adapter A starts to fl ash, press and hold the security
button on Adapter B for 2 seconds then release.
7. Both Adapter A and Adapter B are now networked together.

2.2 Adding Adapter C to existing Network AB (Network ABC)

One unassociated Adapter C is added to an existing Network AB.
- 8 -

Publicité

Table des Matières
loading

Table des Matières