ATIKA LC170F Notice Originale page 21

SAFETY DURING MAINTENANCE
The following safety precautions are particularly important;
however, we cannot warn against all potential dangers
associated with maintenance work. Only you can decide whether
you will carry out a certain activity or not.
Disregarding the maintenance instructions and precautions may
result in serious injuries or death.
Make sure you follow the inspection measures and precautions
in the operating instructions.
Safety advices
Check to make sure that the engine is switched off before
you begin with maintenance and repair tasks. This will
prevent possible hazards.
Carbon monoxide poisoning through engine
exhaust gases
Ensure adequate ventilation when operating the
engine.
Burns through hot parts
Allow the engine and silencer to cool down before
touching them.
Injuries from moving parts
Start the engine only when asked to do so.
MAINTENANCE PLAN
REGULAR MAINTENANCE INTERVALS
Perform in the month or operating hours interval specified, depending on
which occurs earlier
Engine oil
Air filter
Fuel filter
Spark plug
Spark arrester (optional parts)
Idle speed
Valve play
Fuel tank and screen
Combustion chamber
Fuel line
Replace paper filter only.
(1) Shorter maintenance intervals in dusty environments.
(2) These maintenance tasks to be performed by customer service.
Read the instructions. Make sure before beginning with the
working tasks that you have the tools and know-how
required to performing them.
Be careful when handling gasoline to prevent fire or
explosion.
Use only non-flammable solvents when cleaning the parts;
do not use gasoline.
No cigarettes, sparks and flames near parts coming into
contact with fuel.
Customer service knows the engine best and is optimally
equipped to handle maintenance and repair tasks.
Use only new original spare parts for replacement or repair to
guarantee the quality and reliability of your engine.
Check oil level
Oil change
Check
Clean
Replace
Clean
Check / Clean
Replace
Clean
Check / Adjust
Check / Adjust
Clean
Check / Clean
Check
MAINTENANCE
(1)
Every 300 hrs. (2)
Every 2 years (replace if necessary) (2)
(2)
(2)
(2)
20