Publicité
Les langues disponibles
Les langues disponibles
• Remote control
1. Turn the remote control over
2. Using a small crosshead screwdriver, remove the screw
on the back of the remote control.
3. Separate the two parts to access the battery compart-
ment.
4. Lift the metal part with the «+» marking before inserting
the CR2032 battery
5. Insert the batteries, making sure that the polarity is
correct (+/-)
6. Close the remote control compartment and seal it with the screw.
Note: If the indicator led doesn't light up or dims when you press the button,
please replace the batteries.
2. Button's explanations: central alarm
On this alarm there are various buttons. Let's go through them quickly for ease of
use.
1
2
3
4
1
2
3
4
2
4
Note: Each element of this kit can be associated to only one zone (max 10/ zone).
You can also buy a second kit and associate it with your current kit. Being 100%
compatible, you will be able to associate the same opening detector with several
alarm control units. This allows you, for example, to leave one alarm in your living
room and another in your bedroom.
Buttons 1,2,3 and 4 represent zones. Each zone can correspond
to different rooms in your house/apartment/business so that you
can detect where the intrusion is coming from.
Example; Zone 1 = Bedroom, Zone 2 = Garage, Zone 3 = Veran-
da... and so on...
By combining your accessories on this chime mode, you will re-
ceive a musical notification when the opening or motion detector
is triggered.
This can be useful when you run a business to know when
someone is entering or leaving your shop.
Note: You can choose from 32 different melodies
Arming and disarming your alarm.
The side button has several functions:
• Volume: decrease, increase or mute (vibrate)
• Change melodies (chime mode)
• Record a voice message (only in disarmed mode)
EN
Publicité
