Enter Operator N; Recovery Procedure - Wow WAC 2200 Manuel D'instructions

Key in the printing set up the  arrows to move within the line. Then press ENTER to confirm
and go to the next lines.
NOTE: The numerical keys include an alphabet similar to that for text messages, for example:
press "2" once to display "A", twice to display "B", three times for "C" and four time for "2".

ENTER OPERATOR N

From the CONFIGURATION MENU:
Select ENTER OPERATOR N and the following screen is displayed:
It is possible to enter an alphanumeric code of 10 symbols to indicate the habilitation nr of the
operator. This number will be indicated in all printouts.

RECOVERY PROCEDURE

It is possible to chose the default recovery procedure
From the CONFIGURATION MENU:
Select RECOVERY PROCEDURE and the following screen is displayed:
Select "HIGH PRECISION" to perform always an high precision recovery, select "STANDARD"
to perform always a faster recovery (but without SAE J-2788 or SAE J-2843 compliance) or
select "HIGH or STANDARD" to leave the choice at the start of each procedure.
pag.29 - 12/11/2015
INSTRUCTIONS MANUAL
CONF. PRINT HEAD.
1:
. . . . . . . . . . . . .
LANGUAGE
UNIT OF MEASURE
OPTIONS
SET DATE & TIME
CONF. PRINT HEAD.
ENTER OPERATOR NR.
ENTER OPERATOR N°
........
LANGUAGE
UNIT OF MEASURE
OPTIONS
SET DATE & TIME
CONF. PRINT HEAD.
ENTER OPERATOR NR.
RECOVERY PROCEDURE
RECOVERY PROCEDURE
HIGH PRECISION
STANDARD
HIGH or STANDARD