Transportation; Unpacking; Handling; Manufacturer - Wow WAC 2200 Manuel D'instructions

TRANSPORTATION

If the equipment had to be transported must tighten the security screw for locking the load cell
on this service station.
For transportation of R134a or R1234yf are specific regulations in force in each state.
Therefore require prior information to your dealer or service center.
This unit is dedicated to the treatment individually (not simultaneously) the following
refrigerants R134a or R1234yf.
The external bottles used for the storage of refrigerants must be clearly marked to prevent the
mixing of different refrigerants. The bottles must be free of oil and other contaminants and must
be clearly marked so as to identify the refrigerant.
ATTENTION: for the handling, use and storage of the gas R-134a or R1234yf. and for the
management of emergency situations RECOMMENDS refer to refrigerant MSDS.
MUST REQUEST IT TO YOUR SUPPLIER OF REFRIGERANT AND FOLLOW THE
PRESCRIPTIONS

UNPACKING

1) remove the 4 plastic handles and remove the box.
2) remove the protective cover
3) Lift the two front wheels through leveraging the rear handle and the rear wheels (in this way,
the operator must not lift the full weight of the equipment)
4) Pull down slowly the equipment from the pallet through the rear wheels
RISK OF TIPPING: The manufacturer is not responsible for any damage to persons and / or
property, arising from an incorrect removal of the equipment from the pallet, not performed by
suitable means / inadequate protections and without following the regulations in terms of
handling manual load and operating procedures described in this manual.
It 's best to store pallet, box and cover protection for any refunds

HANDLING

The equipment is moved on the wheels; the two smaller wheels can be locked. The
handle facilitates the displacement of the wheels of the apparatus and should not be
used for lifting the same.

MANUFACTURER

INSTRUCTIONS MANUAL
pag.12 - 12/11/2015