Cleaning And Care - OK. OTS 102 Mode D'emploi

USING THE HAIR STRAIGHTENER
Make sure your hairs are completely dry before using the product. Pre-comb your hair to
remove tangles and use hair strands of 3 - 4 cm for straightening. Only straighten each hair
strand for max. 5 seconds with the hair straightener to prevent the hair from overheating.
1
Connect the power plug to
a suitable power outlet.
3
Place the hair strands
between the hair
straightener and press the
handles firmly together.

CLEANING AND CARE

• Warning! Unplug the product and let it cool down completely before cleaning. Never
immerse electrical parts of the product in water during cleaning or operation. Never
hold the product under running water.
• Warning! When cleaning, never use solvents or abrasive materials, hard brushes,
metallic or sharp objects. Solvents are harmful to human health and can attack plastic
parts, while abrasive cleaning mechanisms and tools may scratch the surface(s).
• Clean the product's exterior surfaces with a slightly damp cloth and then dry them
thoroughly.
• Make sure that no water enters the product interior (for example, through the switch).
• Keep the product in a dry, cool location which is protected against moisture and direct
sunlight. Keep this product out of the reach of children.
OTS102_A5_130906.indb 15
2
Turn on the product and
it starts to heat up. The
indicator lights up.
3 to 4 cm
4
Guide the product in
one movement from the
roots of the hair to the
tips but not longer than
5 second to prevent hair
overheating.
15
CAUTION
Never touch the
straightener plates. Danger
of burns! Hold the product
by its handle only.
5
After use, unplug the power
plug from the power outlet.
6/9/13 1:59 PM