Dell Energy Smart Rack Guide D'installation page 14

2 Remove the right back door.
While supporting the door, pull the pin for the top hinge out of the
a
door's hinge-pin housing. See Figure 3.
You hear a click sound as you pull the pin out of the door's hinge-pin
housing. The hinge pins are designed to prevent them from being pulled
out of the hinge body.
Repeat step a for the bottom hinge.
b
Pull the door away from the rack.
c
Figure 3. Removing the Back Doors
1 hinge pin
3 hinge-pin housing
WARNING:
the removed door flat with its outer surface facing upward.
12
Installation Guide
Due to the size and weight of the door, it is recommended that you lay
2 hinge body
1
2
3