Safety Instructions For Hedge Trimmers - STERWINS EHT2-60.4 Notice De Montage, Utilisation Et Entretien

FR 2.8 SERVICE
A) HAVE YOUR POWER TOOL SERVICED BY A QUALIFIED REPAIR PERSON
USING ONLY IDENTICAL REPLACEMENT PARTS. THIS WILL ENSURE THAT
ES
THE SAFETY OF THE POWER TOOL IS MAINTAINED.

2.9 SAFETY INSTRUCTIONS FOR HEDGE TRIMMERS

PT
A) KEEP ALL PARTS OF THE BODY AWAY FROM THE BLADE. DO NOT
REMOVE CUT MATERIAL OR HOLD MATERIAL TO BE CUT WHEN BLADES
ARE MOVING. BLADES CONTINUE TO MOVE AFTER THE SWITCH IS TURNED
IT
OFF. A MOMENT OF INATTENTION WHILE OPERATING THE HEDGE TRIMMER
MAY RESULT IN SERIOUS PERSONAL INJURY.
B) CARRY THE HEDGE TRIMMER BY THE HANDLE WITH THE BLADE
EL
STOPPED AND TAKING CARE NOT TO OPERATE ANY POWER SWITCH.
PROPER CARRYING OF THE HEDGE TRIMMER WILL DECREASE THE RISK OF
INADVERTENT STARTING AND RESULTANT PERSONAL INJURY FROM THE
PL
BLADES.
C) WHEN TRANSPORTING OR STORING THE HEDGE TRIMMER, ALWAYS
RU
FIT THE BLADE COVER. PROPER HANDLING OF THE HEDGE TRIMMER WILL
DECREASE THE RISK OF PERSONAL INJURY FROM THE BLADES.
D) WHEN CLEARING JAMMED MATERIAL OR SERVICING THE UNIT,
KZ
MAKE SURE ALL POWER SWITCHES ARE OFF AND THE POWER CORD
IS DISCONNECTED. UNEXPECTED ACTUATION OF THE HEDGE TRIMMER
WHILE CLEARING JAMMED MATERIAL OR SERVICING MAY RESULT IN SERIOUS
UA
PERSONAL INJURY.
E) HOLD THE HEDGE TRIMMER BY INSULATED GRIPPING SURFACES
RO
ONLY, BECAUSE THE BLADE MAY CONTACT HIDDEN WIRING OR ITS OWN
CORD. BLADES CONTACTING A "LIVE" WIRE MAY MAKE EXPOSED METAL
PARTS OF THE HEDGE TRIMMER "LIVE" AND COULD GIVE THE OPERATOR AN
EN
ELECTRIC SHOCK.
F) KEEP ALL POWER CORDS AND CABLES AWAY FROM CUTTING AREA.
POWER CORDS OR CABLES MAY BE HIDDEN IN HEDGES OR BUSHES AND CAN
BE ACCIDENTALLY CUT BY THE BLADE.
G) DO NOT USE THE HEDGE TRIMMER IN BAD WEATHER CONDITIONS,
ESPECIALLY WHEN THERE IS A RISK OF LIGHTNING. THIS DECREASES THE
RISK OF BEING STRUCK BY LIGHTNING.
• USE THIS HEDGE TRIMMER ONLY FOR THE PURPOSES IT WAS DESIGNED, DO
NOT AIM THE HEDGE TRIMMER AT ANY PEOPLE OR ANIMALS.
B) HAVE THE PRODUCT CHECKED BY A QUALIFIED PROFESSIONAL AND
REPAIRED, IF NECESSARY, BEFORE YOU OPERATE IT AGAIN.
• DISCONNECT THE POWER SOURCE DURING TRANSPORTATION AND DURING
STORAGE.
• STORE HEDGE TRIMMERS INDOORS – WHEN NOT IN USE, HEDGE TRIMMER
SHOULD BE STORED INDOORS IN DRY, LOCKED-UP PLACE – OUT OF REACH OF
CHILDREN.
• KEEP ALL PARTS OF THE BODY AWAY FROM THE CUTTER BLADE. DO NOT
REMOVE CUT MATERIAL OR HOLD MATERIAL TO BE CUT WHEN BLADES ARE
MOVING. BLADES CONTINUE TO MOVE AFTER THE SWITCH IS TURNED OFF..
A MOMENT OF INATTENTION WHILE OPERATING THE HEDGE TRIMMER MAY
RESULT IN SERIOUS PERSONAL INJURY.
• CARRY THE HEDGE TRIMMER BY THE HANDLE WITH THE BLADE STOPPED
AND TAKING CARE NOT TO OPERATE ANY POWER SWITCH. PROPER CARRYING
OF THE HEDGE TRIMMER WILL DECREASE THE RISK OF INADVERTENT
STARTING AND RESULTANT PERSONAL INJURY FROM THE BLADES.
• WHEN CLEARING JAMMED MATERIAL OR SERVICING THE UNIT, MAKE SURE
ALL POWER SWITCHES ARE OFF AND THE POWER CORD IS DISCONNECTED.
UNEXPECTED ACTUATION OF THE HEDGE TRIMMER WHILE CLEARING
JAMMED MATERIAL OR SERVICING MAY RESULT IN SERIOUS PERSONAL INJURY.
• HOLD THE POWER TOOL BY INSULATED GRIPPING SURFACES ONLY,
BECAUSE THE CUTTER BLADE MAY CONTACT HIDDEN WIRING OR ITS OWN
CORD.. CUTTER BLADES CONTACTING A "LIVE" WIRE MAY MAKE EXPOSED
METAL PARTS OF THE POWER TOOL "LIVE" AND COULD GIVE THE OPERATOR
AN ELECTRIC SHOCK.
• CHECK THE HEDGE FOR FOREIGN OBJECTS BEFORE OPERATION, E. G .
WIRE FENCES. TAKE CARE THAT THE CUTTING DEVICE DOES NOT COME INTO
CONTACT WITH WIRE OR OTHER METAL OBJECTS.
• HOLD THE HEDGE TRIMMER PROPERLY, E.G. WITH BOTH HANDS IF TWO
HANDLES ARE PROVIDED. LOSS OF CONTROL CAN CAUSE PERSONAL INJURY.
• KEEP HANDS AND FEET AWAY FROM THE CUTTING DEVICE AT ALL TIMES
AND ESPECIALLY WHEN SWITCHING THE PRODUCT ON.
180