Operation Guide - Braun MiniActionDV Mode D'emploi

3. MiniActionDV installation
MiniActionDV can be used in your hand or
mounted on theClip and bracket when use.
The following pictures explains how to install
it. MiniActionDV can be also mounted on the
bracket after loading into clip.
Load camera
into double
pin clip
Load clip
into bracket
4. Bracket installation.
Bracket can be turned to many angles and
bracket on the bottom can be fixed by nail,
velcro tape or magnet. It can be installed on
almost any places.
5.Charm chain / key hanging
for easy carrying.
6. Other usage modes
for more usage.
E N G L I S H
Load camera
into clip
Finished mount

OPERATION GUIDE

1. Insert Micro SD card.
2. The indicator will be red when the power is
on.
Notice:
1. If battery runs low, the red indicator will
flash quickly and will turn off power after
30 seconds.
2. If Micro SD card is not inserted, the green
indicator will flash quickly.
3. If there is no operation within 30 seconds,
MiniActionDV will standby and turn off red
indicator.
3. Recording mode
• Recording manually:when the sound trigger
switch is off. Press "Record Switch "to start
recording when power on , meanwhile the
green indicator flashes slowly. Press
"Record Switch "again to stop recording
and the files will be saved as "*.AVI" format
Notice:
1. In standby status, press "video recording"
keypad to start video recording, meanwhile
green indicator will flash slowly.
2 The indicator will keep in green and stop
recording when the Micro SD card is full,
then stop displaying after 30 seconds. You
can not press any switch to operate MiniAc-
tionDV when the indicator keep in green.
1 9