Water Tank - SilverCrest SLE 265 B3 Mode D'emploi

Water tank

The water tank
on the front of the water tank
water tank
flash and the appliance will beep for about 20 seconds. The appliance switches
off after a few seconds. The TANK FULL LED
emptied and replaced in the appliance.
♦ Pull the water tank
Use the grips to carry the water tank
Fig. 1
♦ Tip out the water and replace the water tank
appliance continues in the previously set programme for about 3 minutes.
SLE 265 B3
4
has a capacity of approx. 6.5 litres. The water level is indicated
4
. The appliance may only be operated once the
4
is inserted. If the water tank
4
out of the appliance using the grips on the side.
4
is full, the TANK FULL LED
16
flashes until the water tank
4
(see figure 1).
4
into the appliance. The
GB│IE
16
will
4
is
41 ■
│