Crimping Tool; For Push-On Receptacles, Tab Connectors, Sub-D Contacts And Similar Crimp Connectors With Open Barrel - Weidmüller CTF 63 Mode D'emploi

en
A. Handling

Crimping tool

for push-on receptacles, tab connectors, Sub-D contacts and
similar crimp connectors with open barrel.
1. Place the contact in the adjustable locator.
2. Place the conductor in the crimping zone.
3. Squeeze the handles until the ratchet releases.
4. Remove the crimped connection.
B. Additional notes
5. How to release the control cycle ratchet in the event of
incorrect operation: squeeze the handles lightly. Push the pawl
upwards with a screwdriver and release the handles.
6. How to use the adjustable locator for 6.3-mm long tab
connectors.
Field of application
The tool is designed for use in applications described in
the operating instructions only. Using this tool for tasks other
than those described may lead to accidents or the destruction of
the tool.
Maintenance
Subject to the frequency of use and type of service, the tool
must be checked regularly to ensure flawless functioning. In the
event that appropriate tests are not possible on site, these can
be conducted by the manufacturer.
Repairs
The tool must only be repaired by an electro-mechanical
specialist or by the manufacturer, otherwise operator accidents
may result.
6