Device Cleaning - Agu SHE7 Mode D'emploi

Install the application: Android 5.0 and higher, iOS 10.0 and higher.
Option A: Open the PlayMarket or AppStore, enter «AGU» in the
search box and download the application.
Option B: For direct link to download the application, scan this
QR code.
1. Download and run the application.
2. Register and log in with social media site.
3. Select device to connect.
4. Enter the required user data.
5. Switch on the device and press «Connect» button.
1
6. Follow the application instructions.

DEVICE CLEANING

ATTENTION
Do not use chemically active detergents.
to clean the device
Disinfecting agents can be used in
the home.
Lens/measuring sensor: In case of contamination of the infrared thermometer
sensor lens, the readings begin to change immediately as something interferes
with the measurement (usually the readings are too low). To eliminate this prob-
lem, it is enough to wipe the sensor with a soft lint-free cloth (or cotton swab)
moistened with disinfectant solution. Then it is necessary to wipe the lens with
a dry soft lint-free cloth. After the cleaning procedure, the lens surface should be
66
a
2 3
b
4
The AGU Smart Baby Formula Maker
The AGU Smart Infrared Thermometer
I do not have a device yet.
5
Device selection
The AGU Smart Infrared
Thermometer
You are in control any time without
disturbing the baby