Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

DEVICE SETTINGS

Date and time settings
Before the first use of the device and after each replacement of batteries, date
and time are displayed in the format 1-1 00:00. Set the following parameters in
turn: temperature measurement unit, date and time.
Make settings in steps:
measurement unit – year – month – day – hours – minutes
1. Press «EAR» button.
2. Press and hold «SET» button for 5 seconds to activate the setting mode.
3. «C» or «F» measurement unit will be displayed.
• Press «SET» button to change the parameter.
• Press «MEMORY» button to confirm the entry.
4. The year indicator will be displayed, set the current date using «SET»
and «MEM» buttons.
5. Set in turn the month, day, hours and minutes using «SET» and «MEM»
buttons.
6. After setting all the parameters, the «OFF» indicator will be displayed
and the device will switch off automatically.
Reproduction of the previous readings
You can recall up to 10 measurement values stored in the
device memory.
1. Press «EAR» button to switch on the thermometer.
2. Press «MEMORY» button. The last measurement
value stored in memory is displayed first.
3. Press «MEMORY» button one
more time to view the previ-
ously stored value.
• When recording new mea-
surement values (after the
10th value), old values are
deleted automatically.
EN
61

Publicité

Table des Matières
loading

Table des Matières