Nolan N100 5 PLUS Mode D'emploi page 18

N100-5 / PLUS
DUAL ACTION
This unique chin guard opening system - positioned in the centre of the chin guard - al-
lows for easy, one-handed opening and prevents it from accidentally opening because
the chin guard can only be opened after operating the first red lever (release lever) and
then the second red lever (opening lever).
The configuration with chin guard open and VPS raised is recommended to ensure
a better fit of the helmet.
1 CHIN GUARD OPENING
1.1 Push the red release lever outwards by turning it with your thumb (Fig.1).
1.2 Place your forefinger on top of the opening lever and push it downwards so as to
lock the chin guard (Fig.2).
1.3 Pull the chin guard forwards, accompanying it as it rotates upwards with an ellip-
tical movement (Fig.3).
If the helmet is used with chin guard open (J configuration), it is recommended
to place the left side locking slider in position "J" to secure the chin guard in
lifted position (Fig.4B).
2 CHIN GUARD CLOSING
WARNING
When the left side locking slider is in position "J" do not force the closing of the
chin guard because it could damage the helmet's closing mechanism. Move the
locking slider to position "P" (Fig.4A) to close the chin guard.
2.1 Pull the chin guard downwards, accompanying it as it rotates, until you hear the
clicks of the closing mechanism (Fig.3).
2.2 Make sure the chin guard is correctly fastened by pulling it forward and by check-
ing that both sides remain fastened to the shell.
When the left side locking slider is in position "P", the chin guard can be
opened and/or closed (Fig.4A).
When the left side locking slider is in position "J", the chin guard cannot be
closed and remains blocked in the open position (Fig.4B).
WARNING
- The protection level of this helmet whilst riding depends on the configuration
adopted by the user: total protection if the chin guard and visor are closed,
partial protection if the chin guard and/or visor are open.
- Do not remove nor tamper with the fixing screws that connect the chin guard to
the shell.
- Do not use the helmet without the chin guard.
- Never use the helmet in case of malfunctioning and/or damages of the chin guard
opening system. In case of doubts regarding the correct operation of the chin
guard opening mechanism, contact a Nolangroup authorized dealer.
18
INSTRUCTIONS FOR USE