General Troubleshooting - Summit SBC635MBI Mode D'emploi

If there is a problem with the beer dispenser itself, see if you can find it listed in the chart below.
You may be able to save yourself the cost of a service visit.
Problem
The beer dispenser doesn't
work.
The machine switches on
and off frequently.
Door cannot be closed
properly.
Noise

GENERAL TROUBLESHOOTING

Possible Cause
Power supply not firmly connected.
Supplied voltage is too low.
Tripped circuit breaker or blown fuse.
Indoor temperature is higher than usual.
Machine door is opened frequently.
Door is not completely closed.
Temperature control is not set correctly.
Beer keg not properly placed.
Beer dispenser is not level.
Door was reversed and re-installed incorrectly.
Metal plate or beer kegs are out of place.
Rushing noise may be the sound of refrigerant flow, which is
normal.
As each cycle ends, the gurgle of refrigerant flow may be
heard.
Contraction and expansion of inner wall may cause pops
and crackles.
19