Installation; Door Sensor Installation - hoxter ABRA 6.1 Manuel D'installation Et D'utilisation

INSTALLATION

18

DOOR SENSOR INSTALLATION

Break out the indicated opening in the sensor
1
A
holder (B), pull the door sensor through this
hole
and a nut (D).
B
Attach the door sensor with the holder using
2
C
the supplied screws to the designed place on
the doorframe (E).
D
E
Attach the magnetic counterpart on the bottom
3
edge of the doors.
Both the door sensor and the magnetic
4
counterpart must be placed in a common axis.
F
The distance between those parts must be
2-12mm / 0.08-0.47 in.
between these part is too large, underlay the
magnetic counterpart with the distance barrel.
2-12 mm
The magnetic counterpart is strong enough
5
to stay in place. For the fixation use
the supplied screws (G).
G
(A) and fasten with the distance barrel
(F)
In case the distance
(C)