Transport And Storage - Protac SenSit Mode D'emploi

Find video showing how to assemble the SenSit chair at: www.protac.dk
Please note! This is a job for two people!
Before using any stain removers, do a test on a non-visible area (bottom of chair) to make sure
that it does not damage or change the colour of the fabric. Protac does not recommend the use of
stain removers.
Protac accepts no liability for damages resulting from incorrect washing and maintenance.
• Do not wash the inner bag with balls and granulate
• Do not wash the inner bag in the neck rest
Maintenance
Over time a recess will form in the seat as the granulate at the bottom 'settle' through use. It is
therefore important to turn the chair upside down once in a while and shake it a little to allow the
granulate to become evenly distributed again. This will restore the shape of the seat.
Inspect the chair for defects and deficiencies prior to each use, and inspect the chair's seams,
zips, fabric, straps, balls and general condition once a year. If serious defects or deficiencies are
discovered, the Protac SenSit
safety has been restored.
The Protac SenSit can be wiped with a well-wrung cloth soaked in warm soapy water.
®
Can be wiped off with alcohol.

Transport and storage

It is easy to move the Protac SenSit
chair.
The chair should preferably be lifted by two people using
one strap each.
When moving the chair, one can
pull the handle in the side or
the handle at the rear, this puts less strain
on the back. However, if the chair is moved
more than 2 meters, it must be lifted, not to
create unnecessary wear on the cover.
chair must not be used until the defects have been repaired and
®
chair using the two carrying straps fitted on each side of the
®
DK
GB
DE
FI
FR
NL
SE
ES
IT
15