Num'axes PIE1048 Guide D'utilisation page 30

Memory
LCD screen
Capture modes
Photo resolution
Multi-shot
Picture files format
Video resolution
Video length
Video files format
Trigger speed
Camera ID
Time lapse
Password
Operation power
Batteries
External power (DC)
Stand-by energy consumption
Stand-by battery life
Auto power off
Interface
Operating temperature
Operating humidity
Watertightness
Dimensions
Weight
9. Troubleshooting FAQ
The photos do not capture subject of interest
- Check the PIR sensitivity parameter setting. In warm environmental conditions, set
the sensor sensitivity to "High" and in cold weather use, set the sensor sensitivity to
"Low".
PIE1048 - Indice A – Juillet 2020
SD card (from 4GB up to 32GB – class 10 minimum)
Built-in 2.4" TFT colour screen
Photo | Video | Photo + Video
16MP (4608x3456) | 12MP (4000x3000) |
8MP (3264x1488) | 5MP (2592x1944) |
3MP (2048x1536) | 1MP (1280x960)
Programmable from 1 to 3 photos per trigger
JPEG
FULL HD (1920x1080) | HD (1280x720)| 720x480 |
VGA (640x480) | QVGA (320x240)
Programmable from 5 seconds to 10 minutes
AVI
Between 0.2 and 0.6 second
Programmable (ON | OFF)
Programmable (ON | OFF)
Programmable (ON | OFF)
Batteries: 6V | DC: 6V – 1A
8xAA (alkaline or rechargeable Ni-MH)
6V – 1A
Less than 0.2 mA
Approximately 8 months
In TEST mode, the camera will automatically power off
after 2 minutes without any press on the keypad.
Mini USB 2.0 port | SD card slot | DC port
-20°C to +60°C | -4°F to 140°F
5% to 90%
IP66
135 x 93 x 69mm | 5.3 x 3.7 x 2.7in
263 g (without batteries) – 450 g (with batteries)
30/88