Protecting Your Data - Panasonic RP-SDW64GE1K Mode D'emploi

Removal and storage of the SDXC memory
card
Opening and closing the case
Hold the case with both hands when opening and closing it to
prevent damage to the card.
Removing and storing the card
Slide the card on the tray when removing and storing it. Ensure
the card is correctly placed on the tray before closing the case.
About writing on this card
You can write notes directly onto this card with a
pen, etc.
≥ Do not use excessive force as it may damage
the card. Take care not to stain the metal
terminals.
≥ Use a pencil or similar to write on the reverse
side of the card, and not writing instruments with
a hard tip, such as a ballpoint pen.

Protecting your data

≥ Switch the write-protect switch a to
"LOCK". Unlock when you want to record or
edit the card again.
≥ While data is being read or written, do not
remove the card or turn off any equipment
using the card. Do not remove the batteries
from battery-operated equipment. These
actions can cause data to be destroyed.
≥ Make backup copies of your data wherever possible.
Panasonic will not accept responsibility for any data loss, or
loss directly or indirectly caused by data loss.
Handling and storage precautions
≥ When a reformatting is required, format with compatible
equipment or use the dedicated formatting software. You may
have a problem with the compatibility or performance when it is
formatted with the formatting software that is included in your
PC. For the dedicated formatting software, see the Panasonic
Web Site.
http://panasonic.jp/support/global/cs/sd/download/sd_formatter.html
≥ Do not disassemble or modify the card.
≥ Do not impact, bend, drop, or wet.
≥ Do not touch the metal terminals with your hands or metal
objects.
≥ Do not detach the label on the card.
≥ Do not attach other labels or stickers.
≥ Do not use or store this card in a location subjected to static
electricity or electrical noise. If the host device does not operate
normally due to the effects of static electricity on the card, then
remove the card from the host device and insert it again.
≥ After using the card, store it in a commercially available card
case with anti-static electricity treatment, or similar.
≥ Do not place it inside a car that may become very hot, or places
that will get very hot, such as under direct sunlight.
≥ Do not use or store in humid or dusty locations.
≥ Do not use or store in locations exposed to corrosive gases.
About "
"
regarding continuous writing between SDXC compatible
equipment and SDXC memory cards (SD Speed Class),
specified by the SD Standards. If the SDXC compatible
equipment is compatible with the SD Speed Class, and
recommends the Class 10 card, you will have stable recording
operation using this card.
Cautions about disposal or transferring
ownership of this card
≥ SDXC compatible equipment may contain the functions
"Format" and "Erase". However, in most cases all data on the
card will not be completely erased even after performing these
functions. When disposing or transferring ownership of the
card, we recommend using Panasonic formatting software
(http://panasonic.jp/support/global/cs/sd/download/sd_formatter.html)
to completely erase all data from the card.
≥ When you dispose of the SDXC memory card, destroy it

physically or erase all data completely and follow your local
rules of separation and disposal of waste.
≥ SDXC Logo is a trademark of SD-3C, LLC.
≥ Microsoft
Windows
Windows
of the Microsoft Corporation in the United States and/or
other countries.
≥ Apple, Mac OS is either registered trademarks or
trademarks of Apple Inc. in the United States and/or other
countries.
≥ Other names of systems and products mentioned in these
instructions are usually the registered trademarks or
trademarks of the manufacturers who developed the system
or product concerned.
" (SD Speed Class, Class 10)
" represents Class 10 of the speed specification
® ® ®
, Windows , Windows 98, Windows
® ®
2000, Windows XP, Windows Vista
®
7 are either registered trademarks or trademarks
®
Me,
®
and
3