Handling and storage precautions
≥ If a microSDXC card is used on devices supporting SDXC
memory cards, always fit it to the exclusive adaptor. Insert or
remove the microSDXC card together with the adaptor. Do not
leave the adaptor connected to the device. Otherwise, this may
cause a malfunction, or a device or data failure.
≥ This card is formatted to the SDXC memory card standard. If
reformatting is ever necessary, format it using SDXC
compatible equipment or SD formatting software compatible
with SDXC memory card. Formatting the card with any other
software will make the card non-standard and cause problems
with compatibility and performance. For a free version of SD
formatting software, visit the following homepage.
http://panasonic.jp/support/global/cs/sd/download/sd_formatter.html
≥ When a microSDXC card or an adaptor is removed from the
device, do not leave the card or adaptor out in the open.
≥ Do not disassemble or remodel.
≥ Do not impact, bend, drop, or wet.
≥ Do not touch the metal terminals with your hands or metal
objects.
≥ Do not attach other labels or stickers.
≥ Do not use this card in a location subjected to static electricity
or electrical noise. If the host device does not operate normally
due to the effects of static electricity on the card, then remove
the card from the host device and insert it again.
≥ Do not use or store in locations directly exposed to sunlight, a
heat vent, or a heating appliance.
≥ Do not use or store in humid or dusty locations.
≥ Do not use or store in locations exposed to corrosive gases.
Protecting your data
≥ While data is being read or written, do not remove the card or
turn off any equipment using the card. Do not remove the
batteries from battery-operated equipment. These actions can
cause data to be destroyed.
≥ Make backup copies of your data wherever possible.
Panasonic will not accept responsibility for any data loss, or
loss directly or indirectly caused by data loss.
Cautions about disposal or transferring
ownership of this card
≥ SDXC compatible equipment may contain the functions
"Format" and "Erase". However, in most cases all data on the
card will not be completely erased even after performing these
functions. When disposing or transferring ownership of the
card, we recommend using Panasonic formatting software
(http://panasonic.jp/support/global/cs/sd/download/sd_formatter.html)
to completely erase all data from the card.
≥ When you dispose of the microSDXC memory card, destroy it
physically or erase all data completely and follow your local
rules of separation and disposal of waste.
Specifications
Interface:
New standard microSDXC memory
card interface (New ultra high speed
UHS-I interface and conventional SD
interface)
Clock frequency:
up to 50 MHz
(UHS-I Interface DDR50, conventional
SD Interface)
up to 100 MHz
(UHS-I Interface SDR50)
up to 208 MHz (UHS-I Interface
SDR104)
Operating voltage:
2.7 V to 3.6 V
Dimensions (WtHtD): 11.0 mma15.0 mma1.0 mm
(
Mass (Weight):
0.5 g (0.02 oz)
Operating temperature: j25 oC to i85 oC (j13 oF to i185 oF)
When the operating temperature condition during the card
operation such as read and write is different, since read time
fluctuates or write error may occur, please use the card within the
variable temperature width of 60 oC.
≥ Specifications are subject to change without notice.
≥ Mass and dimensions are approximate.
≥ microSD and microSDXC Logos are trademarks of SD-3C, LLC.
a
a
)
55
76
/
/
5
/
128
128
128
3