Panasonic RP-SDW64GE1K Mode D'emploi page 2

WARNING
Keep out of reach of children
Danger of swallowing.
If swallowed, seek medical advice immediately.
Do not disassemble or modify
Doing so may result in fire or electrification, or damage the
equipment being used.
Stop using when any malfunction occurs
(Whenever any smoke, odd odor, unusual noise is detected;
when liquid or foreign objects got inside; or after being
dropped or damaged)
Using it in such a condition may result in fire.
READ THIS FIRST
You may be prompted to format the card when it is used with
equipment not compatible with the SDXC memory card (such
as a PC). Doing so will result in loss of data, so be sure to
cancel.
About this SDXC memory card
This SDXC memory card can only be used with SDXC
compatible equipment. Before using this card, please confirm
that your equipment is compatible with SDXC memory cards.
How to check SDXC compatible equipment
Check with SDXC logo mark, the operating instructions of the
equipment, or information supplied by the manufacturer.
≥ Note that it may cause a problem with the compatibility of the
card or data may be lost when used on equipment not
compatible with SDXC memory cards.
When the SDXC memory card is inserted into
equipment not compatible with SDXC memory cards
≥ A message saying that "This card is malfunctioning", "This card
cannot be used", etc., may display.
≥ A message saying "This card needs to be formatted", etc., or a
format screen may display.
> It will cause a problem with compatibility if it is formatted, so
do not format.
≥ The power may not go on.
2
ENGLISH
To use on a PC
Use this card on a PC by connecting the included USB reader/
writer.
For details about the USB reader/writer, read "User Guide for
USB Reader/Writer".
≥ You can use it as it is with Windows 7.
≥ Update to SP1 or later is required for Windows Vista.
≥ Update to SP2 or later is required for Windows XP. Apply
update program (KB955704) after updating to SP2 or later. For
details, see the following Web Site:
http://support.microsoft.com/?kbid=955704
≥ It cannot be used with Windows 2000, Windows Me, or
Windows 98.
≥ It cannot be used with the Mac OS. (As of February 2010)
User Guide for USB Reader/Writer
To avoid lost data or corrupted SDXC memory card, please
refrain from removing the reader/writer from an USB port or
shutting down the PC while reading or writing.
No driver is required.
1. Boot up a computer.
2. Remove the cap and plug the reader/writer into the USB port.
3. Insert a SDXC memory card, with its label facing the top side
of the reader/writer, into the slot of the reader/writer.
4. An icon of the reader/writer will appear in "My Computer".
5. Proceed to operation. Upon completion and after LED stops
flashing, remove the SDXC memory card, and unplug & recap
the reader/writer accordingly.
Writing to the card may become impossible when abnormal
operations occur, such as removing the card or turning off the
power while data from the PC is being written to the card. In such
a case, writing becomes possible again by performing the
following operation.
Right-click the icon representing the drive with this card in
1
"My Computer".
Click "Properties".
2
3 Select the "Tools" tab, and click "Check" in "Error check".
Place a check mark on "Correct file system error automati-
4
cally", and click "Start".
To use the SDXC memory card by directly inserting into the SD
card slot on your computer, be sure to check the information
provided by the manufacturer of your PC.