LENCO SBW-800 Mode D'emploi page 16

USB flashdrive play
1. Short press the
flahsdrive into the USB connection. The soundbar will start playing
the music from the USB. Short press
Short press
You can use USB flashdrives of max 128GB formatted in FAT32 format
The soundbar can play MP3, WAV and WMA files.
Note: The usb connection is not intended for charging or connecting
other devices.
Trouble shooting
Problem
A source device
cannot connect
with the soundbar
The soundbar is
already connected
with another
Bluetooth device.
Quality of audio
play from a
connected
Bluetooth device
is poor
The connected
Bluetooth device
connects and
disconnects
constantly.
Button to turn on the soundbar, insert a USB
or to play the previous/next song.
Solution
You have not enabled the Bluetooth function of
the source device. See the user manual of the
source device on how to enable the Bluetooth
function.
Press and hold Bluetooth pairing button on the
soundbar to disconnect the connected source
device, then try pairing again.
The Bluetooth reception is poor. Move the
source device closer to the soundbar or remove
any obstacles between the source device and the
soundbar.
The Bluetooth reception is poor. Move the
source device closer to the soundbar or remove
any obstacles between the source device and the
soundbar.
15
to play/pause the music.